Newark: 510-505-9775 or 800-229-7728
Mountain View: 650-948-6666
Email: info@FranciscanGlass.com
      
Search

Miscellaneous Stained Glass Tools

   Minimize
Call Us in Newark, CA
(510) 505-9775 or
(800) 229-7728

MISCELLANEOUS TOOLS



 
INLAND GLASS STATION
 
INLAND SOLDER STATION
The GlassStation™ keeps all your tools and supplies handy and keeps you organized!
Key Features
• GlassStation™ has storage for your lead and foil pattern shears, breaker / groziers, breakers, lead nippers, running pliers, glass cutters, craft knives, pens, foil, solder, flux bottle, flux brush and other hand tools.
• Coil-type, soldering iron holder keeps your soldering iron secure and safely holds it hot or cold. with a convenient tip cleaning sponge below.
• Brass flux brush holder holds your brush directly over the bottle and elimiates messy drips and accicents.
• The copper foil holder accommodates 4 rolls and has a tear-off bar.
• Built in retractable handles make it easy to carry.
• A tray along the front provides space additional storage for miscellaneous items and small tools.
• The GlassStation™ is made of high-impact injection molded plastic that will not corrode or melt if solder is accidentally dripped on it.

Part #IA-GS
A temperature controller with MiniPhaser™ circuitry that also organizes the tools and supplies commonly used when soldering!
Key Features
• Built in soldering iron temperature control based on the MiniPhaser with LED on/off indicator and adjustable control dial and a grounded outlet to plug your iron into.
• A 6 foot grounded power cord essentially extends the reach of your iron by 6 feet - a huge benefit when working on a large flat project or lampshade.Cord router clips located along the left side of the plastic housing keep the iron cord away from the built-in iron stand.
• A built-in coil-type iron holder with heat resistant collar fits most soldering irons. A metal drip plate is located below the iron holder with a well for a tip cleaning sponge.
• A flux bottle well with a flux brush and a flux brush holder. The brush holder lets flux drip off the brush, back into the bottle, after the flux brush is used.
• A solder spool post is sized to hold a full one pound roll of any solder.
• A triangular flux sponge can be covered with liquid flux for easily fluxing foiled glass, rings or wire before tinning or soldering.
• A catch all bin runs along the front for holding the flux bottle cap and provides a place to keep miscellaneous items such as rings, pins, or extra iron tips.
• A pliers/tool well designed to hold mini-needle nose pliers which are a great aid for holding tiny rings or hinges while soldering.
• One Year Warranty

Part #IA-SS
 
Gryphon Miter Saw
 


Jarmac Came Saw
The Gryphon Miter saw is particularly well suited for making premium cuts in thin wall extrusions of brass, zinc, steel and copper. It has a very fine abrasive blade which cuts cleanly and coolly resulting in a minimum of flash.
The saw is used largely in the stained glass (for cutting the "came" used to join separate pieces of glass) and the automotive fields (for cutting tubing of all types including braided stainless hose). A large adjustable table provides settings for accurate angles. The chop saw design along with the built in clamp for the work and safety shield provide protection to the operator.

Part #                           Description
MS-1                             Complete Saw
MS-1B                           Abrasive saw blade replacement
MS-1C                           Toothed saw blade replacement
Jarmac Came Saw - Cut zinc, lead and brass came effortlessly with Jarmac's came saw. Specifically made for the stained glass industry, the Jarmac’s came saw has a new 6.5” x 9” work table and a 1/15 HP motor running at 5000 RPM & 1/10 HP high horse power motor for faster cutting of brass & copper came.  The saw also features a blade guard, adjustable mitre guide and rip fence for cutting repetitively sized pieces. Blade height can be adjusted up to 5/8". The Jarmac comes with a standard fine tooth metal cutting blade, and an optional fine chrome tip blade that hold its edge longer can be purchased separately. We also offer as additional options; permanent 45° and 90° miter guides. The Fixed Miter Guides are miter guides which are welded to a perfect 45° or 90° angle so they can never give you an inaccurate angle. Made in the U.S.A.

Part #                           Description
ZS-1001SG-I                 1/15 HP Standard Came Saw
ZS-1001HHP                  1/10 HP High Horse Power Came Saw
ZS-1F                            Standard Replacement Blade for Came
ZS-1FC                          Chrome Plated Replacement Blade for Came
ZS-1C                            Coarse Blade for Wood
ZS-3                              Abrasive Carborundum Blade for Non-Ferris Metals
ZS-2                              Adjustable Miter Guide
ZS-8006                        Fixed 90° Miter Guide
ZS-8008                        Fixed 45° Miter Guide
ZS-8010                        Fixed 22 1/2° Miter Guide

 
Jarmac Deluxe Came Saw
Jarmac Deluxe Came Saw - If you like buying the best there is to offer, consider Jarmac’s Deluxe saw. It sports a larger 9” x 12” work surface and a 1/16 HP motor running at 5000 RPM or 1/15 HP high horse power motor for faster cutting of brass and copper came. A tilting arbor allows you to cut compound angles and a rip fence makes cutting repetitively sized pieces a breeze. Blade height can be adjusted up to 5/8". A blade guard and adjustable miter guide are included. The Deluxe models comes with a standard fine tooth metal cutting blade, and an optional fine chrome tip blade that hold its edge longer can be purchased separately. Fixed Miter Guides as well as Mounting Cup Feet are also available for this model. Made in the U.S.A.

Part #                           Description
ZS-1010SG                   1/16 HP Standard Came Saw
ZS-1011SG                   1/15 HP High Horse Power Came Saw
ZS-1F                            Standard Replacement Blade for Came
ZS-1FC                          Chrome Plated Replacement Blade for Came
ZS-1C                            Coarse Blade for Wood
ZS-3                              Abrasive Carborundum Blade for Non-Ferris Metals
ZS-2                              Adjustable Miter Guide
ZS-8007                        Fixed 90° Miter Guide
ZS-8009                        Fixed 45° Miter Guide
ZS-8011                        Fixed 22 1/2° Miter Guid
   


Lamp Wedgie
 

Professional Boxer
Wedgies are soft, extremely slip proof 4" x 4" x 3" thick triangles that are used to 'prop up' lampshades, boxes, suncatchers and panels for ease of soldering. It's like having a second pair of hands! Set of two.
The Wedgies Jr. are 4x4x2 and sold in a sets of 3

Part #WD-2    Original
Part #WD-JR    Juniors
The Lamp Wedgie enable you to prop your lamp, or other large 3-D project against the non-slip foam. Use two or more Wedgies for more support and work away! This product is convenient and helps you work more efficiently. Size is 13 x 5 x 4" overall. Comes with instructions and mounting hardware.

Part #WD-LW

You can use the Professional Boxer to make anything square or rectangular. Not only does the Professional Boxer align your sides squarely but, because of its design, it prevents you from aligning the vertical edges of two sides that are not cut square.

Part #WD-OC


 


 

Octahex
 

Ultraviolet Light
 

Exacto Knife
The Octahex is an acrylic box, with angles set perfect for creating octogon and hexegon boxes.
The fixture places the sides at the exact angle required for a perfect hexagon or octagon. Simply make sure that the two sides to be tack-soldered are flat against the sides.
The base is marked "HEX" on the side used to make hexagons, and "OCTA" on the side used to make octagons.
Instructions included.

Part #WD-PB
Small UV light for curing ultraviolet glue.  Requires 4 AA batteries

Part #UV-L1
With #7 blade, great for cutting out patterns for stained glass as well as cutting of Vinyl sandblast resist tape.

Part #4022
Pack of 5 Blades
Part #4022A
Pack of 100 Blades
Part #4022B
 


Lumocolor Pens

 



Dura-Ink Pen

 
Silver Sharpie

Lumocolor pens have waterproof ink.  Comes in 2 tip sizes.  Ink will not lift off during the grinding process.

Part #       Description
LU-317B    Medium point Black
LU-318B    Fine Point Black
LU-318R    Fine Point Red
Black ink permanent marker with fine felt point.  Good general purpose marker

Part #OE-12
Silver Paint marker with fine felt tip.  Great for use with dark colored glass.  Will not lift off in grinding process.


 
Deco-Color
 
Carb Stone
 

Safty Goggles
White Paint marker with fine felt tip.  Great for use with dark colored glass.  Will not lift off in grinding process.

Part #OE-14
1 ½”x12 carborundum grinding stone.  Good for smoothening sharp edges and minor shaping of glass.

Part #4005
Inexpensive clear plastic safty goggles.  Recommended for use when grinding on glass.

Part #4011
Privacy Statement    Terms Of Use